Struct PlaneMeshBuilder

pub struct PlaneMeshBuilder {
    pub plane: Plane3d,
    pub subdivisions: u32,
}

A builder used for creating a Mesh with a Plane3d shape.

Fields

plane: Plane3d

The Plane3d shape.

subdivisions: u32

The number of subdivisions in the mesh.

0 - is the original plane geometry, the 4 points in the XZ plane.

1 - is split by 1 line in the middle of the plane on both the X axis and the Z axis, resulting in a plane with 4 quads / 8 triangles.

2 - is a plane split by 2 lines on both the X and Z axes, subdividing the plane into 3 equal sections along each axis, resulting in a plane with 9 quads / 18 triangles.

and so on…

Implementations

impl PlaneMeshBuilder

pub fn new(normal: Dir3, size: Vec2) -> PlaneMeshBuilder

Creates a new PlaneMeshBuilder from a given normal and size.

pub fn from_size(size: Vec2) -> PlaneMeshBuilder

Creates a new PlaneMeshBuilder from the given size, with the normal pointing upwards.

pub fn from_length(length: f32) -> PlaneMeshBuilder

Creates a new PlaneMeshBuilder from the given length, with the normal pointing upwards, and the resulting PlaneMeshBuilder being a square.

pub fn normal(self, normal: Dir3) -> PlaneMeshBuilder

Sets the normal of the plane, aka the direction the plane is facing.

pub fn size(self, width: f32, height: f32) -> PlaneMeshBuilder

Sets the size of the plane mesh.

pub fn subdivisions(self, subdivisions: u32) -> PlaneMeshBuilder

Sets the subdivisions of the plane mesh.

0 - is the original plane geometry, the 4 points in the XZ plane.

1 - is split by 1 line in the middle of the plane on both the X axis and the Z axis, resulting in a plane with 4 quads / 8 triangles.

2 - is a plane split by 2 lines on both the X and Z axes, subdividing the plane into 3 equal sections along each axis, resulting in a plane with 9 quads / 18 triangles.

Trait Implementations

impl Clone for PlaneMeshBuilder

fn clone(&self) -> PlaneMeshBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PlaneMeshBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for PlaneMeshBuilder

fn default() -> PlaneMeshBuilder

Returns the “default value” for a type.

impl FromReflect for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn from_reflect( reflect: &(dyn PartialReflect + 'static), ) -> Option<PlaneMeshBuilder>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl MeshBuilder for PlaneMeshBuilder

fn build(&self) -> Mesh

Builds a Mesh based on the configuration in self.

impl PartialReflect for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn try_apply( &mut self, value: &(dyn PartialReflect + 'static), ) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<PlaneMeshBuilder>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn try_into_reflect( self: Box<PlaneMeshBuilder>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.

fn try_as_reflect(&self) -> Option<&(dyn Reflect + 'static)>

Attempts to cast this type to a fully-reflected value.

fn try_as_reflect_mut(&mut self) -> Option<&mut (dyn Reflect + 'static)>

Attempts to cast this type to a mutable, fully-reflected value.

fn into_partial_reflect(self: Box<PlaneMeshBuilder>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value.

fn as_partial_reflect(&self) -> &(dyn PartialReflect + 'static)

Casts this type to a reflected value.

fn as_partial_reflect_mut(&mut self) -> &mut (dyn PartialReflect + 'static)

Casts this type to a mutable, reflected value.

fn reflect_partial_eq( &self, value: &(dyn PartialReflect + 'static), ) -> Option<bool>

Returns a “partial equality” comparison result.

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection.

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value.

fn clone_value(&self) -> Box<dyn PartialReflect>

👎Deprecated since 0.16.0: to clone reflected values, prefer using reflect_clone. To convert reflected values to dynamic ones, use to_dynamic.

Clones Self into its dynamic representation.

fn to_dynamic(&self) -> Box<dyn PartialReflect>

Converts this reflected value into its dynamic representation based on its kind.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Reflect for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn into_any(self: Box<PlaneMeshBuilder>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &(dyn Any + 'static)

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<PlaneMeshBuilder>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.

fn as_reflect(&self) -> &(dyn Reflect + 'static)

Casts this type to a fully-reflected value.

fn as_reflect_mut(&mut self) -> &mut (dyn Reflect + 'static)

Casts this type to a mutable, fully-reflected value.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

impl Struct for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn field(&self, name: &str) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field named name as a &dyn PartialReflect.

fn field_mut( &mut self, name: &str, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field named name as a &mut dyn PartialReflect.

fn field_at(&self, index: usize) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field with index index as a &dyn PartialReflect.

fn field_at_mut( &mut self, index: usize, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field with index index as a &mut dyn PartialReflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn to_dynamic_struct(&self) -> DynamicStruct

fn clone_dynamic(&self) -> DynamicStruct

👎Deprecated since 0.16.0: use to_dynamic_struct instead

Clones the struct into a DynamicStruct.

fn get_represented_struct_info(&self) -> Option<&'static StructInfo>

Will return None if TypeInfo is not available.

impl TypePath for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync,

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for PlaneMeshBuilder

where PlaneMeshBuilder: Any + Send + Sync, Plane3d: FromReflect + TypePath + MaybeTyped + RegisterForReflection, u32: FromReflect + TypePath + MaybeTyped + RegisterForReflection,

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.

impl Copy for PlaneMeshBuilder