Struct UsageFlags

pub struct UsageFlags(/* private fields */);

Memory usage type. Bits set define intended usage for requested memory.

Implementations

impl UsageFlags

pub const FAST_DEVICE_ACCESS: Self = _

Hints for allocator to find memory with faster device access. If no flags is specified than FAST_DEVICE_ACCESS is implied.

pub const HOST_ACCESS: Self = _

Memory will be accessed from host. This flags guarantees that host memory operations will be available. Otherwise implementation is encouraged to use non-host-accessible memory.

pub const DOWNLOAD: Self = _

Hints allocator that memory will be used for data downloading. Allocator will strongly prefer host-cached memory. Implies HOST_ACCESS flag.

pub const UPLOAD: Self = _

Hints allocator that memory will be used for data uploading. If DOWNLOAD flag is not set then allocator will assume that host will access memory in write-only manner and may pick not host-cached. Implies HOST_ACCESS flag.

pub const TRANSIENT: Self = _

Hints allocator that memory will be used for short duration allowing to use faster algorithm with less memory overhead. If use holds returned memory block for too long then effective memory overhead increases instead. Best use case is for staging buffer for single batch of operations.

pub const DEVICE_ADDRESS: Self = _

Requests memory that can be addressed with u64. Allows fetching device address for resources bound to that memory.

impl UsageFlags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u8

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u8) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u8) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u8) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl UsageFlags

pub const fn iter(&self) -> Iter<UsageFlags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<UsageFlags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for UsageFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for UsageFlags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = UsageFlags

The resulting type after applying the & operator.

impl BitAndAssign for UsageFlags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for UsageFlags

fn bitor(self, other: UsageFlags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = UsageFlags

The resulting type after applying the | operator.

impl BitOrAssign for UsageFlags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for UsageFlags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = UsageFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for UsageFlags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for UsageFlags

fn clone(&self) -> UsageFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UsageFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<UsageFlags> for UsageFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for UsageFlags

const FLAGS: &'static [Flag<UsageFlags>] = _

The set of defined flags.

type Bits = u8

The underlying bits type.

fn bits(&self) -> u8

Get the underlying bits value.

fn from_bits_retain(bits: u8) -> UsageFlags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<UsageFlags> for UsageFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for UsageFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for UsageFlags

type Item = UsageFlags

The type of the elements being iterated over.

type IntoIter = Iter<UsageFlags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for UsageFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for UsageFlags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = UsageFlags

The resulting type after applying the ! operator.

impl Octal for UsageFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for UsageFlags

fn cmp(&self, other: &UsageFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for UsageFlags

fn eq(&self, other: &UsageFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for UsageFlags

fn partial_cmp(&self, other: &UsageFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PublicFlags for UsageFlags

type Primitive = u8

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for UsageFlags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = UsageFlags

The resulting type after applying the - operator.

impl SubAssign for UsageFlags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for UsageFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for UsageFlags

impl Eq for UsageFlags

impl StructuralPartialEq for UsageFlags