pub struct NonSend<'w, T>where
T: 'static,{ /* private fields */ }
Expand description
Shared borrow of a non-Send
resource.
Only Send
resources may be accessed with the Res
SystemParam
. In case that the
resource does not implement Send
, this SystemParam
wrapper can be used. This will instruct
the scheduler to instead run the system on the main thread so that it doesn’t send the resource
over to another thread.
This SystemParam
fails validation if non-send resource doesn’t exist.
This will cause a panic, but can be configured to do nothing or warn once.
Use Option<NonSend<T>>
instead if the resource might not always exist.
Implementations§
Source§impl<'w, T> NonSend<'w, T>where
T: 'static,
impl<'w, T> NonSend<'w, T>where
T: 'static,
Sourcepub fn is_added(&self) -> bool
pub fn is_added(&self) -> bool
Returns true
if the resource was added after the system last ran.
Sourcepub fn is_changed(&self) -> bool
pub fn is_changed(&self) -> bool
Returns true
if the resource was added or mutably dereferenced after the system last ran.
Sourcepub fn changed_by(&self) -> MaybeLocation
pub fn changed_by(&self) -> MaybeLocation
The location that last caused this to change.
Trait Implementations§
Source§impl<'a, T> From<NonSendMut<'a, T>> for NonSend<'a, T>
impl<'a, T> From<NonSendMut<'a, T>> for NonSend<'a, T>
Source§fn from(nsm: NonSendMut<'a, T>) -> NonSend<'a, T>
fn from(nsm: NonSendMut<'a, T>) -> NonSend<'a, T>
Converts to this type from the input type.
Source§impl<'a, T> SystemParam for NonSend<'a, T>where
T: 'static,
impl<'a, T> SystemParam for NonSend<'a, T>where
T: 'static,
Source§type State = ComponentId
type State = ComponentId
Used to store data which persists across invocations of a system.
Source§type Item<'w, 's> = NonSend<'w, T>
type Item<'w, 's> = NonSend<'w, T>
The item type returned when constructing this system param.
The value of this associated type should be
Self
, instantiated with new lifetimes. Read moreSource§fn init_state(
world: &mut World,
system_meta: &mut SystemMeta,
) -> <NonSend<'a, T> as SystemParam>::State
fn init_state( world: &mut World, system_meta: &mut SystemMeta, ) -> <NonSend<'a, T> as SystemParam>::State
Registers any
World
access used by this SystemParam
and creates a new instance of this param’s State
.Source§unsafe fn validate_param(
_: &<NonSend<'a, T> as SystemParam>::State,
_system_meta: &SystemMeta,
world: UnsafeWorldCell<'_>,
) -> Result<(), SystemParamValidationError>
unsafe fn validate_param( _: &<NonSend<'a, T> as SystemParam>::State, _system_meta: &SystemMeta, world: UnsafeWorldCell<'_>, ) -> Result<(), SystemParamValidationError>
Source§unsafe fn get_param<'w, 's>(
_: &'s mut <NonSend<'a, T> as SystemParam>::State,
system_meta: &SystemMeta,
world: UnsafeWorldCell<'w>,
change_tick: Tick,
) -> <NonSend<'a, T> as SystemParam>::Item<'w, 's>
unsafe fn get_param<'w, 's>( _: &'s mut <NonSend<'a, T> as SystemParam>::State, system_meta: &SystemMeta, world: UnsafeWorldCell<'w>, change_tick: Tick, ) -> <NonSend<'a, T> as SystemParam>::Item<'w, 's>
Creates a parameter to be passed into a
SystemParamFunction
. Read moreSource§unsafe fn new_archetype(
state: &mut Self::State,
archetype: &Archetype,
system_meta: &mut SystemMeta,
)
unsafe fn new_archetype( state: &mut Self::State, archetype: &Archetype, system_meta: &mut SystemMeta, )
For the specified
Archetype
, registers the components accessed by this SystemParam
(if applicable).a Read moreSource§fn apply(state: &mut Self::State, system_meta: &SystemMeta, world: &mut World)
fn apply(state: &mut Self::State, system_meta: &SystemMeta, world: &mut World)
Applies any deferred mutations stored in this
SystemParam
’s state.
This is used to apply Commands
during ApplyDeferred
.Source§fn queue(
state: &mut Self::State,
system_meta: &SystemMeta,
world: DeferredWorld<'_>,
)
fn queue( state: &mut Self::State, system_meta: &SystemMeta, world: DeferredWorld<'_>, )
Queues any deferred mutations to be applied at the next
ApplyDeferred
.impl<'w, T> ReadOnlySystemParam for NonSend<'w, T>
Auto Trait Implementations§
impl<'w, T> Freeze for NonSend<'w, T>
impl<'w, T> RefUnwindSafe for NonSend<'w, T>where
T: RefUnwindSafe,
impl<'w, T> Send for NonSend<'w, T>where
T: Sync,
impl<'w, T> Sync for NonSend<'w, T>where
T: Sync,
impl<'w, T> Unpin for NonSend<'w, T>
impl<'w, T> UnwindSafe for NonSend<'w, T>where
T: RefUnwindSafe,
Blanket Implementations§
Source§impl<T, U> AsBindGroupShaderType<U> for T
impl<T, U> AsBindGroupShaderType<U> for T
Source§fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
Return the
T
ShaderType
for self
. When used in AsBindGroup
derives, it is safe to assume that all images in self
exist.Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T, C, D> Curve<T> for D
impl<T, C, D> Curve<T> for D
Source§fn sample_unchecked(&self, t: f32) -> T
fn sample_unchecked(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t
, extracting the associated value.
This is the unchecked version of sampling, which should only be used if the sample time t
is already known to lie within the curve’s domain. Read moreSource§fn sample(&self, t: f32) -> Option<T>
fn sample(&self, t: f32) -> Option<T>
Sample a point on this curve at the parameter value
t
, returning None
if the point is
outside of the curve’s domain.Source§fn sample_clamped(&self, t: f32) -> T
fn sample_clamped(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t
, clamping t
to lie inside the
domain of the curve.Source§impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
Source§fn sample_iter(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = Option<T>>
fn sample_iter( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = Option<T>>
Sample a collection of
n >= 0
points on this curve at the parameter values t_n
,
returning None
if the point is outside of the curve’s domain. Read moreSource§fn sample_iter_unchecked(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_unchecked( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
Sample a collection of
n >= 0
points on this curve at the parameter values t_n
,
extracting the associated values. This is the unchecked version of sampling, which should
only be used if the sample times t_n
are already known to lie within the curve’s domain. Read moreSource§fn sample_iter_clamped(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_clamped( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
Sample a collection of
n >= 0
points on this curve at the parameter values t_n
,
clamping t_n
to lie inside the domain of the curve. Read moreSource§fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
Create a new curve by mapping the values of this curve via a function
f
; i.e., if the
sample at time t
for this curve is x
, the value at time t
on the new curve will be
f(x)
.Source§fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
Create a new
Curve
whose parameter space is related to the parameter space of this curve
by f
. For each time t
, the sample from the new curve at time t
is the sample from
this curve at time f(t)
. The given domain
will be the domain of the new curve. The
function f
is expected to take domain
into self.domain()
. Read moreSource§fn reparametrize_linear(
self,
domain: Interval,
) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
fn reparametrize_linear( self, domain: Interval, ) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
Source§fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
Source§fn graph(self) -> GraphCurve<T, Self>
fn graph(self) -> GraphCurve<T, Self>
Source§fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
Source§fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
Source§fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
Source§fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
Source§fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
Source§fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
Source§fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
Source§fn samples(
&self,
samples: usize,
) -> Result<impl Iterator<Item = T>, ResamplingError>
fn samples( &self, samples: usize, ) -> Result<impl Iterator<Item = T>, ResamplingError>
Extract an iterator over evenly-spaced samples from this curve. Read more
Source§impl<C, T> CurveResampleExt<T> for C
impl<C, T> CurveResampleExt<T> for C
Source§fn resample<I>(
&self,
segments: usize,
interpolation: I,
) -> Result<SampleCurve<T, I>, ResamplingError>
fn resample<I>( &self, segments: usize, interpolation: I, ) -> Result<SampleCurve<T, I>, ResamplingError>
Resample this
Curve
to produce a new one that is defined by interpolation over equally
spaced sample values, using the provided interpolation
to interpolate between adjacent samples.
The curve is interpolated on segments
segments between samples. For example, if segments
is 1,
only the start and end points of the curve are used as samples; if segments
is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Resample this
Curve
to produce a new one that is defined by interpolation over equally
spaced sample values, using automatic interpolation to interpolate between adjacent samples.
The curve is interpolated on segments
segments between samples. For example, if segments
is 1,
only the start and end points of the curve are used as samples; if segments
is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_uneven<I>(
&self,
sample_times: impl IntoIterator<Item = f32>,
interpolation: I,
) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
fn resample_uneven<I>( &self, sample_times: impl IntoIterator<Item = f32>, interpolation: I, ) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
Source§fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Resample this
Curve
to produce a new one that is defined by automatic interpolation over
samples taken at the given set of times. The given sample_times
are expected to contain at least
two valid times within the curve’s domain interval. Read moreSource§impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
Source§fn with_derivative(self) -> SampleDerivativeWrapper<C>
fn with_derivative(self) -> SampleDerivativeWrapper<C>
This curve, but with its first derivative included in sampling. Read more
Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Converts
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
, which can then be
downcast
into Box<dyn ConcreteType>
where ConcreteType
implements Trait
.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Converts
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
, which can then be further
downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Converts
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Converts
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s.Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Convert
Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Convert
Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s.Source§impl<T> DowncastSend for T
impl<T> DowncastSend for T
Source§impl<T> DowncastSync for T
impl<T> DowncastSync for T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
Converts
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
Converts
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T, C, D> SampleDerivative<T> for D
impl<T, C, D> SampleDerivative<T> for D
Source§fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
Sample this curve at the parameter value
t
, extracting the associated value
in addition to its derivative. This is the unchecked version of sampling, which
should only be used if the sample time t
is already known to lie within the
curve’s domain. Read moreSource§fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
Sample this curve’s value and derivative at the parameter value
t
, returning
None
if the point is outside of the curve’s domain.Source§fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
Sample this curve’s value and derivative at the parameter value
t
, clamping t
to lie inside the domain of the curve.