pub struct AssetMut<'a, A>where
A: Asset,{ /* private fields */ }Expand description
Unique mutable borrow of an asset.
AssetEvent::Modified events will be only triggered if an asset itself is mutably borrowed.
Just as an example, this allows checking if a material property has changed before modifying it to avoid unnecessary material extraction down the pipeline.
Implementations§
Source§impl<'a, A> AssetMut<'a, A>where
A: Asset,
impl<'a, A> AssetMut<'a, A>where
A: Asset,
Sourcepub fn into_inner(self) -> &'a mut A
pub fn into_inner(self) -> &'a mut A
Marks with inner asset as modified and returns reference to it.
Sourcepub fn into_inner_untracked(self) -> &'a mut A
pub fn into_inner_untracked(self) -> &'a mut A
Returns reference to the inner asset but doesn’t mark it as modified.
Sourcepub fn bypass_change_detection(&mut self) -> &mut A
pub fn bypass_change_detection(&mut self) -> &mut A
Manually bypasses change detection, allowing you to mutate the underlying value
without emitting AssetEvent::Modified event.
§Warning
This is a risky operation, that can have unexpected consequences on any system relying on this code. However, it can be an essential escape hatch when, for example, you are trying to synchronize representations using change detection and need to avoid infinite recursion.
Trait Implementations§
Auto Trait Implementations§
impl<'a, A> !UnwindSafe for AssetMut<'a, A>
impl<'a, A> Freeze for AssetMut<'a, A>
impl<'a, A> RefUnwindSafe for AssetMut<'a, A>where
A: RefUnwindSafe,
impl<'a, A> Send for AssetMut<'a, A>
impl<'a, A> Sync for AssetMut<'a, A>
impl<'a, A> Unpin for AssetMut<'a, A>
impl<'a, A> UnsafeUnpin for AssetMut<'a, A>
Blanket Implementations§
Source§impl<T, U> AsBindGroupShaderType<U> for T
impl<T, U> AsBindGroupShaderType<U> for T
Source§fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U
T ShaderType for self. When used in AsBindGroup
derives, it is safe to assume that all images in self exist.Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
impl<T> ConditionalSend for Twhere
T: Send,
impl<R> CryptoRng for R
Source§impl<T, C, D> Curve<T> for D
impl<T, C, D> Curve<T> for D
Source§fn sample_unchecked(&self, t: f32) -> T
fn sample_unchecked(&self, t: f32) -> T
t, extracting the associated value.
This is the unchecked version of sampling, which should only be used if the sample time t
is already known to lie within the curve’s domain. Read moreSource§fn sample(&self, t: f32) -> Option<T>
fn sample(&self, t: f32) -> Option<T>
t, returning None if the point is
outside of the curve’s domain.Source§fn sample_clamped(&self, t: f32) -> T
fn sample_clamped(&self, t: f32) -> T
t, clamping t to lie inside the
domain of the curve.Source§impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
impl<C, T> CurveExt<T> for Cwhere
C: Curve<T>,
Source§fn sample_iter(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = Option<T>>
fn sample_iter( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = Option<T>>
n >= 0 points on this curve at the parameter values t_n,
returning None if the point is outside of the curve’s domain. Read moreSource§fn sample_iter_unchecked(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_unchecked( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
n >= 0 points on this curve at the parameter values t_n,
extracting the associated values. This is the unchecked version of sampling, which should
only be used if the sample times t_n are already known to lie within the curve’s domain. Read moreSource§fn sample_iter_clamped(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>
fn sample_iter_clamped( &self, iter: impl IntoIterator<Item = f32>, ) -> impl Iterator<Item = T>
n >= 0 points on this curve at the parameter values t_n,
clamping t_n to lie inside the domain of the curve. Read moreSource§fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>where
F: Fn(T) -> S,
f; i.e., if the
sample at time t for this curve is x, the value at time t on the new curve will be
f(x).Source§fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
Curve whose parameter space is related to the parameter space of this curve
by f. For each time t, the sample from the new curve at time t is the sample from
this curve at time f(t). The given domain will be the domain of the new curve. The
function f is expected to take domain into self.domain(). Read moreSource§fn reparametrize_linear(
self,
domain: Interval,
) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
fn reparametrize_linear( self, domain: Interval, ) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>
Source§fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
Source§fn graph(self) -> GraphCurve<T, Self>
fn graph(self) -> GraphCurve<T, Self>
Source§fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
fn zip<S, C>(
self,
other: C,
) -> Result<ZipCurve<T, S, Self, C>, InvalidIntervalError>where
C: Curve<S>,
Source§fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>where
C: Curve<T>,
Source§fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>
Source§fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>
Source§fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>
Source§fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>
Source§fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>where
T: VectorSpace,
C: Curve<T>,
Source§fn samples(
&self,
samples: usize,
) -> Result<impl Iterator<Item = T>, ResamplingError>
fn samples( &self, samples: usize, ) -> Result<impl Iterator<Item = T>, ResamplingError>
Source§impl<C, T> CurveResampleExt<T> for C
impl<C, T> CurveResampleExt<T> for C
Source§fn resample<I>(
&self,
segments: usize,
interpolation: I,
) -> Result<SampleCurve<T, I>, ResamplingError>
fn resample<I>( &self, segments: usize, interpolation: I, ) -> Result<SampleCurve<T, I>, ResamplingError>
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using the provided interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using automatic interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. Read moreSource§fn resample_uneven<I>(
&self,
sample_times: impl IntoIterator<Item = f32>,
interpolation: I,
) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
fn resample_uneven<I>( &self, sample_times: impl IntoIterator<Item = f32>, interpolation: I, ) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
Source§fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
T: StableInterpolate,
Curve to produce a new one that is defined by automatic interpolation over
samples taken at the given set of times. The given sample_times are expected to contain at least
two valid times within the curve’s domain interval. Read moreSource§impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
impl<T, C> CurveWithDerivative<T> for Cwhere
T: HasTangent,
C: SampleDerivative<T>,
Source§fn with_derivative(self) -> SampleDerivativeWrapper<C>
fn with_derivative(self) -> SampleDerivativeWrapper<C>
Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be
downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further
downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> DowncastSend for T
impl<T> DowncastSend for T
Source§impl<T> DowncastSync for T
impl<T> DowncastSync for T
Source§impl<T, W> HasTypeWitness<W> for Twhere
W: MakeTypeWitness<Arg = T>,
T: ?Sized,
impl<T, W> HasTypeWitness<W> for Twhere
W: MakeTypeWitness<Arg = T>,
T: ?Sized,
Source§impl<T> Identity for Twhere
T: ?Sized,
impl<T> Identity for Twhere
T: ?Sized,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§fn in_current_span(self) -> Instrumented<Self> ⓘ
fn in_current_span(self) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> IntoResult<T> for T
impl<T> IntoResult<T> for T
Source§fn into_result(self) -> Result<T, RunSystemError>
fn into_result(self) -> Result<T, RunSystemError>
impl<T> Read<Exclusive, BecauseExclusive> for Twhere
T: ?Sized,
impl<R> RngCore for Rwhere
R: Rng,
Source§impl<R> RngExt for R
impl<R> RngExt for R
Source§fn random<T>(&mut self) -> Twhere
StandardUniform: Distribution<T>,
fn random<T>(&mut self) -> Twhere
StandardUniform: Distribution<T>,
StandardUniform distribution. Read moreSource§fn random_iter<T>(self) -> Iter<StandardUniform, Self, T> ⓘ
fn random_iter<T>(self) -> Iter<StandardUniform, Self, T> ⓘ
Source§fn random_range<T, R>(&mut self, range: R) -> Twhere
T: SampleUniform,
R: SampleRange<T>,
fn random_range<T, R>(&mut self, range: R) -> Twhere
T: SampleUniform,
R: SampleRange<T>,
Source§fn random_bool(&mut self, p: f64) -> bool
fn random_bool(&mut self, p: f64) -> bool
p of being true. Read moreSource§fn random_ratio(&mut self, numerator: u32, denominator: u32) -> bool
fn random_ratio(&mut self, numerator: u32, denominator: u32) -> bool
numerator/denominator of being
true. Read moreSource§fn sample<T, D>(&mut self, distr: D) -> Twhere
D: Distribution<T>,
fn sample<T, D>(&mut self, distr: D) -> Twhere
D: Distribution<T>,
Source§fn sample_iter<T, D>(self, distr: D) -> Iter<D, Self, T> ⓘwhere
D: Distribution<T>,
Self: Sized,
fn sample_iter<T, D>(self, distr: D) -> Iter<D, Self, T> ⓘwhere
D: Distribution<T>,
Self: Sized,
Source§impl<T, C, D> SampleDerivative<T> for D
impl<T, C, D> SampleDerivative<T> for D
Source§fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_unchecked(&self, t: f32) -> WithDerivative<T>
t, extracting the associated value
in addition to its derivative. This is the unchecked version of sampling, which
should only be used if the sample time t is already known to lie within the
curve’s domain. Read moreSource§fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
fn sample_with_derivative(&self, t: f32) -> Option<WithDerivative<T>>
t, returning
None if the point is outside of the curve’s domain.Source§fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
fn sample_with_derivative_clamped(&self, t: f32) -> WithDerivative<T>
t, clamping t
to lie inside the domain of the curve.