Struct VolumetricFog 

pub struct VolumetricFog {
    pub ambient_color: Color,
    pub ambient_intensity: f32,
    pub jitter: f32,
    pub step_count: u32,
}

When placed on a bevy_camera::Camera3d, enables volumetric fog and volumetric lighting, also known as light shafts or god rays.

Requires using WebGPU on Wasm builds.

Fields

ambient_color: Color

Color of the ambient light.

This is separate from Bevy’s AmbientLight because an EnvironmentMapLight is still considered an ambient light for the purposes of volumetric fog. If you’re using a EnvironmentMapLight, for best results, this should be a good approximation of the average color of the environment map.

Defaults to white.

ambient_intensity: f32

The brightness of the ambient light.

If there’s no EnvironmentMapLight, set this to 0.

Defaults to 0.1.

jitter: f32

The maximum distance to offset the ray origin randomly by, in meters.

This is intended for use with temporal antialiasing. It helps fog look less blocky by varying the start position of the ray, using interleaved gradient noise.

step_count: u32

The number of raymarching steps to perform.

Higher values produce higher-quality results with less banding, but reduce performance.

The default value is 64.

Trait Implementations

impl Clone for VolumetricFog

fn clone(&self) -> VolumetricFog

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Component for VolumetricFog

where Self: Send + Sync + 'static,

const STORAGE_TYPE: StorageType = bevy_ecs::component::StorageType::Table

A constant indicating the storage type used for this component.

type Mutability = Mutable

A marker type to assist Bevy with determining if this component is mutable, or immutable. Mutable components will have Component<Mutability = Mutable>, while immutable components will instead have Component<Mutability = Immutable>.

fn register_required_components( _requiree: ComponentId, required_components: &mut RequiredComponentsRegistrator<'_, '_>, )

Registers required components.

fn clone_behavior() -> ComponentCloneBehavior

Called when registering this component, allowing to override clone function (or disable cloning altogether) for this component.

fn on_add() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_add ComponentHook for this Component if one is defined.

fn on_insert() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_insert ComponentHook for this Component if one is defined.

fn on_replace() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_replace ComponentHook for this Component if one is defined.

fn on_remove() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_remove ComponentHook for this Component if one is defined.

fn on_despawn() -> Option<for<'w> fn(DeferredWorld<'w>, HookContext)>

Gets the on_despawn ComponentHook for this Component if one is defined.

fn map_entities<E>(_this: &mut Self, _mapper: &mut E)

where E: EntityMapper,

Maps the entities on this component using the given EntityMapper. This is used to remap entities in contexts like scenes and entity cloning. When deriving Component, this is populated by annotating fields containing entities with #[entities]

impl Debug for VolumetricFog

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for VolumetricFog

fn default() -> Self

Returns the “default value” for a type.

impl FromReflect for VolumetricFog

fn from_reflect(reflect: &dyn PartialReflect) -> Option<Self>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for VolumetricFog

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl PartialReflect for VolumetricFog

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn try_apply(&mut self, value: &dyn PartialReflect) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<Self>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn try_into_reflect( self: Box<Self>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.

fn try_as_reflect(&self) -> Option<&dyn Reflect>

Attempts to cast this type to a fully-reflected value.

fn try_as_reflect_mut(&mut self) -> Option<&mut dyn Reflect>

Attempts to cast this type to a mutable, fully-reflected value.

fn into_partial_reflect(self: Box<Self>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value.

fn as_partial_reflect(&self) -> &dyn PartialReflect

Casts this type to a reflected value.

fn as_partial_reflect_mut(&mut self) -> &mut dyn PartialReflect

Casts this type to a mutable, reflected value.

fn reflect_partial_eq(&self, value: &dyn PartialReflect) -> Option<bool>

Returns a “partial equality” comparison result.

fn debug(&self, f: &mut Formatter<'_>) -> Result

Debug formatter for the value.

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection.

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value.

fn to_dynamic(&self) -> Box<dyn PartialReflect>

Converts this reflected value into its dynamic representation based on its kind.

fn reflect_clone_and_take<T>(&self) -> Result<T, ReflectCloneError>

where T: 'static, Self: Sized + TypePath,

For a type implementing PartialReflect, combines reflect_clone and take in a useful fashion, automatically constructing an appropriate ReflectCloneError if the downcast fails.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Reflect for VolumetricFog

fn into_any(self: Box<Self>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &dyn Any

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut dyn Any

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<Self>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.

fn as_reflect(&self) -> &dyn Reflect

Casts this type to a fully-reflected value.

fn as_reflect_mut(&mut self) -> &mut dyn Reflect

Casts this type to a mutable, fully-reflected value.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

impl Struct for VolumetricFog

fn field(&self, name: &str) -> Option<&dyn PartialReflect>

Returns a reference to the value of the field named name as a &dyn PartialReflect.

fn field_mut(&mut self, name: &str) -> Option<&mut dyn PartialReflect>

Returns a mutable reference to the value of the field named name as a &mut dyn PartialReflect.

fn field_at(&self, index: usize) -> Option<&dyn PartialReflect>

Returns a reference to the value of the field with index index as a &dyn PartialReflect.

fn field_at_mut(&mut self, index: usize) -> Option<&mut dyn PartialReflect>

Returns a mutable reference to the value of the field with index index as a &mut dyn PartialReflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn to_dynamic_struct(&self) -> DynamicStruct

Creates a new DynamicStruct from this struct.

fn get_represented_struct_info(&self) -> Option<&'static StructInfo>

Will return None if TypeInfo is not available.

impl TypePath for VolumetricFog

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for VolumetricFog

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.

impl Copy for VolumetricFog