Struct RepeatedGridTrack 

pub struct RepeatedGridTrack { /* private fields */ }

Represents a possibly repeated GridTrack.

The repetition parameter can either be:

• The integer 1, in which case the track is non-repeated.
• a u16 count to repeat the track N times.
• A GridTrackRepetition::AutoFit or GridTrackRepetition::AutoFill.

Note: that in the common case you want a non-repeating track (repetition count 1), you may use the constructor methods on GridTrack to create a RepeatedGridTrack. i.e. GridTrack::px(10.0) is equivalent to RepeatedGridTrack::px(1, 10.0).

You may only use one auto-repetition per track list. And if your track list contains an auto repetition then all tracks (in and outside of the repetition) must be fixed size (px or percent). Integer repetitions are just shorthand for writing out N tracks longhand and are not subject to the same limitations.

Implementations

impl RepeatedGridTrack

pub fn px<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with a fixed pixel size

pub fn percent<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with a percentage size

pub fn auto<T>(repetition: u16) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with automatic size

pub fn fr<T>(repetition: u16, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with an fr size. Note that this will give the track a content-based minimum size. Usually you are best off using GridTrack::flex instead which uses a zero minimum size.

pub fn flex<T>(repetition: u16, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with a minmax(0, Nfr) size.

pub fn min_content<T>(repetition: u16) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with min-content size

pub fn max_content<T>(repetition: u16) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with max-content size

pub fn fit_content_px<T>(repetition: u16, limit: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of fit-content() grid tracks with fixed pixel limit

pub fn fit_content_percent<T>(repetition: u16, limit: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of fit-content() grid tracks with percentage limit

pub fn minmax<T>( repetition: impl Into<GridTrackRepetition>, min: MinTrackSizingFunction, max: MaxTrackSizingFunction, ) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of minmax() grid track

pub fn vmin<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with the percentage size of the viewport’s smaller dimension

pub fn vmax<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with the percentage size of the viewport’s larger dimension

pub fn vh<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with the percentage size of the viewport’s height dimension

pub fn vw<T>(repetition: impl Into<GridTrackRepetition>, value: f32) -> T

where T: From<RepeatedGridTrack>,

Create a repeating set of grid tracks with the percentage size of the viewport’s width dimension

pub fn repeat_many<T>( repetition: impl Into<GridTrackRepetition>, tracks: impl Into<Vec<GridTrack>>, ) -> T

where T: From<RepeatedGridTrack>,

Create a repetition of a set of tracks

Trait Implementations

impl Clone for RepeatedGridTrack

fn clone(&self) -> RepeatedGridTrack

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RepeatedGridTrack

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for RepeatedGridTrack

fn default() -> RepeatedGridTrack

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for RepeatedGridTrack

fn deserialize<__D>( __deserializer: __D, ) -> Result<RepeatedGridTrack, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl From<GridTrack> for RepeatedGridTrack

fn from(track: GridTrack) -> RepeatedGridTrack

Converts to this type from the input type.

impl From<RepeatedGridTrack> for Vec<RepeatedGridTrack>

fn from(track: RepeatedGridTrack) -> Vec<RepeatedGridTrack>

Converts to this type from the input type.

impl FromReflect for RepeatedGridTrack

fn from_reflect( reflect: &(dyn PartialReflect + 'static), ) -> Option<RepeatedGridTrack>

Constructs a concrete instance of Self from a reflected value.

fn take_from_reflect( reflect: Box<dyn PartialReflect>, ) -> Result<Self, Box<dyn PartialReflect>>

Attempts to downcast the given value to Self using, constructing the value using from_reflect if that fails.

impl GetTypeRegistration for RepeatedGridTrack

fn get_type_registration() -> TypeRegistration

Returns the default TypeRegistration for this type.

fn register_type_dependencies(registry: &mut TypeRegistry)

Registers other types needed by this type.

impl PartialEq for RepeatedGridTrack

fn eq(&self, other: &RepeatedGridTrack) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialReflect for RepeatedGridTrack

fn get_represented_type_info(&self) -> Option<&'static TypeInfo>

Returns the TypeInfo of the type represented by this value.

fn try_apply( &mut self, value: &(dyn PartialReflect + 'static), ) -> Result<(), ApplyError>

Tries to apply a reflected value to this value.

fn reflect_kind(&self) -> ReflectKind

Returns a zero-sized enumeration of “kinds” of type.

fn reflect_ref(&self) -> ReflectRef<'_>

Returns an immutable enumeration of “kinds” of type.

fn reflect_mut(&mut self) -> ReflectMut<'_>

Returns a mutable enumeration of “kinds” of type.

fn reflect_owned(self: Box<RepeatedGridTrack>) -> ReflectOwned

Returns an owned enumeration of “kinds” of type.

fn try_into_reflect( self: Box<RepeatedGridTrack>, ) -> Result<Box<dyn Reflect>, Box<dyn PartialReflect>>

Attempts to cast this type to a boxed, fully-reflected value.

fn try_as_reflect(&self) -> Option<&(dyn Reflect + 'static)>

Attempts to cast this type to a fully-reflected value.

fn try_as_reflect_mut(&mut self) -> Option<&mut (dyn Reflect + 'static)>

Attempts to cast this type to a mutable, fully-reflected value.

fn into_partial_reflect(self: Box<RepeatedGridTrack>) -> Box<dyn PartialReflect>

Casts this type to a boxed, reflected value.

fn as_partial_reflect(&self) -> &(dyn PartialReflect + 'static)

Casts this type to a reflected value.

fn as_partial_reflect_mut(&mut self) -> &mut (dyn PartialReflect + 'static)

Casts this type to a mutable, reflected value.

fn reflect_partial_eq( &self, value: &(dyn PartialReflect + 'static), ) -> Option<bool>

Returns a “partial equality” comparison result.

fn reflect_clone(&self) -> Result<Box<dyn Reflect>, ReflectCloneError>

Attempts to clone Self using reflection.

fn apply(&mut self, value: &(dyn PartialReflect + 'static))

Applies a reflected value to this value.

fn to_dynamic(&self) -> Box<dyn PartialReflect>

Converts this reflected value into its dynamic representation based on its kind.

fn reflect_clone_and_take<T>(&self) -> Result<T, ReflectCloneError>

where T: 'static, Self: Sized + TypePath,

For a type implementing PartialReflect, combines reflect_clone and take in a useful fashion, automatically constructing an appropriate ReflectCloneError if the downcast fails.

fn reflect_hash(&self) -> Option<u64>

Returns a hash of the value (which includes the type).

fn debug(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Debug formatter for the value.

fn is_dynamic(&self) -> bool

Indicates whether or not this type is a dynamic type.

impl Reflect for RepeatedGridTrack

fn into_any(self: Box<RepeatedGridTrack>) -> Box<dyn Any>

Returns the value as a Box<dyn Any>.

fn as_any(&self) -> &(dyn Any + 'static)

Returns the value as a &dyn Any.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Returns the value as a &mut dyn Any.

fn into_reflect(self: Box<RepeatedGridTrack>) -> Box<dyn Reflect>

Casts this type to a boxed, fully-reflected value.

fn as_reflect(&self) -> &(dyn Reflect + 'static)

Casts this type to a fully-reflected value.

fn as_reflect_mut(&mut self) -> &mut (dyn Reflect + 'static)

Casts this type to a mutable, fully-reflected value.

fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>

Performs a type-checked assignment of a reflected value to this value.

impl Serialize for RepeatedGridTrack

fn serialize<__S>( &self, __serializer: __S, ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Struct for RepeatedGridTrack

fn field(&self, name: &str) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field named name as a &dyn PartialReflect.

fn field_mut( &mut self, name: &str, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field named name as a &mut dyn PartialReflect.

fn field_at(&self, index: usize) -> Option<&(dyn PartialReflect + 'static)>

Returns a reference to the value of the field with index index as a &dyn PartialReflect.

fn field_at_mut( &mut self, index: usize, ) -> Option<&mut (dyn PartialReflect + 'static)>

Returns a mutable reference to the value of the field with index index as a &mut dyn PartialReflect.

fn name_at(&self, index: usize) -> Option<&str>

Returns the name of the field with index index.

fn field_len(&self) -> usize

Returns the number of fields in the struct.

fn iter_fields(&self) -> FieldIter<'_>

Returns an iterator over the values of the reflectable fields for this struct.

fn to_dynamic_struct(&self) -> DynamicStruct

Creates a new DynamicStruct from this struct.

fn get_represented_struct_info(&self) -> Option<&'static StructInfo>

Will return None if TypeInfo is not available.

impl TypePath for RepeatedGridTrack

fn type_path() -> &'static str

Returns the fully qualified path of the underlying type.

fn short_type_path() -> &'static str

Returns a short, pretty-print enabled path to the type.

fn type_ident() -> Option<&'static str>

Returns the name of the type, or None if it is anonymous.

fn crate_name() -> Option<&'static str>

Returns the name of the crate the type is in, or None if it is anonymous.

fn module_path() -> Option<&'static str>

Returns the path to the module the type is in, or None if it is anonymous.

impl Typed for RepeatedGridTrack

fn type_info() -> &'static TypeInfo

Returns the compile-time info for the underlying type.

impl StructuralPartialEq for RepeatedGridTrack